Air curtain design

We offer the right air curtain system for every application. This will depend on the selection criteria. You can find the right device using our product configurator.
Please contact us if you have any specific questions, and we will be happy to help.

button konfigurator


Establish what building situation applies
(A, B or C).


Check the discharge height at which the system will be installed.

The necessary screening will depend
on meteorological and building-related
factors. Examples of these are direct and strong wind
load, an entrance shielded by streets
across the general wind
direction etc.
 

Flow arising solely through temperature
temperature differences between inside and outside during the heating period: between
0,3 bis 1 m/s


Where there is generally a low incoming flow, e.g..
due to other properties in front on the pressure side
of the building with incoming flow: between 1 and 3 m/s

Where there is generally a strong incoming flow, e.g.
position on corners or market squares with little shelter
rom properties in front: between 1 and 6 m/s. 
Considerably more in completely exposed areas out in the open.



auslegung01  

SITUATION A

Door surfaces are on one side of the building. No
notable possibilities to discharge air through
thermal or chimney effect.

walze innen_drehend

IDW INSTALLATION:

Air roll
rotating inwards.

          
auslegung02  

SITUATION B

Door surfaces are on one side of the building. Possibilities
to discharge air into upper floors through thermal effect
or outside through chimney effect..


walze aussen_drehend

ADW INSTALLATION:

Air roll
rotating outwards.

          
auslegung03  

SITUATION C

Unscreened door surfaces are also on other sides of buildings, e.g. at the side or opposite. The air discharge potential is identical to or greater
than the size of the door surface to be screened.

   


ENERGY-SAVING

Air curtain systems make considerable contributions to reducing energy costs. Up to 80 % with the Teddington CONVERGO® system.

SALES PSYCHOLOGY

Visitors to a shop with the right temperature demonstrate far greater willingness to spend time and money there.

INTEGRATED ENVIRONMENTAL PROTECTION.

Ultimately the saving also reduces energy consumption, which is good for the environment.

GOOD AIR CONDITIONING

For example, sealing off unpleasant smells or dust development in industry. In addition, a good indoor climate reduces the incidence of staff sickness.